WV / Star City
WV · Tap water records
Star City tap water, in plain English
Here is what the EPA's own data shows about tap water in Star City. According to EPA SDWIS data retrieved June 2026, Star City is served by 1 active community water system, together reported to serve about 2,207 people.
As of June 2026, EPA records show 31 violations across the community water system(s) serving Star City, going back to the earliest EPA record. None were health-based; the records are monitoring or reporting violations (a required test or report was late or missed). Each is listed by system below, with its status.
What the EPA has on record, by system
Star City Town Of
2,207 served · surface water · PWSID WV3303116 - Monitoring Lead and Copper Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 3 times between October 2010 and October 2025. EPA records do not show all of these as returned to compliance.
- Monitoring Public Notice: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 6 times between November 2020 and November 2023. All have since returned to compliance, per EPA records.
- Monitoring TTHM: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 8 times between September 2016 and June 2022. EPA records do not show all of these as returned to compliance.
- Monitoring Total Haloacetic Acids (HAA5): a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 8 times between September 2016 and June 2022. EPA records do not show all of these as returned to compliance.
- Monitoring Consumer Confidence Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 6 times between July 2007 and July 2021. All have since returned to compliance, per EPA records.
What this means
A health-based violation means a contaminant was recorded above the limit the EPA tracks for it. A monitoring or reporting violation means a required test or report was late or missed — not that a contaminant was measured above a limit. “Returned to compliance” means the EPA recorded the issue as resolved.
This page summarizes the EPA's own records and does not assess whether your water is safe to drink. For the most current details, you can verify every record directly with the EPA, and contact your water system with questions.
Source: U.S. EPA Envirofacts SDWIS, retrieved June 2026. Records cover the EPA's full reporting history for these systems. Verify at EPA ECHO.