SC / Johns Island
SC · Tap water records
Johns Island tap water, in plain English
Here is what the EPA's own data shows about tap water in Johns Island. According to EPA SDWIS data retrieved June 2026, Johns Island is served by 2 active community water systems, together reported to serve about 28,531 people.
As of June 2026, EPA records show 8 violations across the community water system(s) serving Johns Island, going back to the earliest EPA record. None were health-based; the records are monitoring or reporting violations (a required test or report was late or missed). Each is listed by system below, with its status.
What the EPA has on record, by system
St John'S Water (Sc1020002)
22,592 served · surface water · PWSID SC1020002 - Monitoring Lead and Copper Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded once in January 1993. All have since returned to compliance, per EPA records.
Seabrook Island Town Of (1010009)
5,939 served · surface water · PWSID SC1010009 - Monitoring Revised Total Coliform Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 2 times in January 2024. All have since returned to compliance, per EPA records.
- Monitoring Chlorine: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 2 times in January 2024. All have since returned to compliance, per EPA records.
- Monitoring Surface Water Treatment Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 2 times in January 2024. All have since returned to compliance, per EPA records.
- Monitoring Consumer Confidence Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded once in July 2007. All have since returned to compliance, per EPA records.
What this means
A health-based violation means a contaminant was recorded above the limit the EPA tracks for it. A monitoring or reporting violation means a required test or report was late or missed — not that a contaminant was measured above a limit. “Returned to compliance” means the EPA recorded the issue as resolved.
This page summarizes the EPA's own records and does not assess whether your water is safe to drink. For the most current details, you can verify every record directly with the EPA, and contact your water system with questions.
Source: U.S. EPA Envirofacts SDWIS, retrieved June 2026. Records cover the EPA's full reporting history for these systems. Verify at EPA ECHO.