MN / Tintah
MN · Tap water records
Tintah tap water, in plain English
Here is what the EPA's own data shows about tap water in Tintah. According to EPA SDWIS data retrieved June 2026, Tintah is served by 1 active community water system, together reported to serve about 68 people.
As of June 2026, EPA records show 13 violations across the community water system(s) serving Tintah, going back to the earliest EPA record. 4 of these are classified by the EPA as health-based (a contaminant recorded above the limit the EPA tracks); the rest are monitoring or reporting violations. Each is listed by system below, with its status.
What the EPA has on record, by system
Tintah
68 served · groundwater · PWSID MN1780003 - Health-based Stage 1 Disinfectants and Disinfection Byproducts Rule: a health-based violation (a contaminant recorded above the limit the EPA tracks), recorded 4 times between July 2022 and July 2025. The EPA record for these does not include a measured level. EPA records do not show all of these as returned to compliance.
- Monitoring Revised Total Coliform Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 3 times between July 2017 and October 2025. All have since returned to compliance, per EPA records.
- Monitoring Chlorine: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded once in October 2025. EPA records do not show all of these as returned to compliance.
- Monitoring LEAD AND COPPER RULE REVISIONS: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded once in July 2025. EPA records do not show all of these as returned to compliance.
- Monitoring Lead and Copper Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 4 times between April 2000 and January 2021. All have since returned to compliance, per EPA records.
What this means
A health-based violation means a contaminant was recorded above the limit the EPA tracks for it. A monitoring or reporting violation means a required test or report was late or missed — not that a contaminant was measured above a limit. “Returned to compliance” means the EPA recorded the issue as resolved.
This page summarizes the EPA's own records and does not assess whether your water is safe to drink. For the most current details, you can verify every record directly with the EPA, and contact your water system with questions.
Source: U.S. EPA Envirofacts SDWIS, retrieved June 2026. Records cover the EPA's full reporting history for these systems. Verify at EPA ECHO.