KY / Dixon
KY · Tap water records
Dixon tap water, in plain English
Here is what the EPA's own data shows about tap water in Dixon. According to EPA SDWIS data retrieved June 2026, Dixon is served by 2 active community water systems, together reported to serve about 7,193 people.
As of June 2026, EPA records show 22 violations across the community water system(s) serving Dixon, going back to the earliest EPA record. 8 of these are classified by the EPA as health-based (a contaminant recorded above the limit the EPA tracks); the rest are monitoring or reporting violations. Each is listed by system below, with its status.
What the EPA has on record, by system
Webster Co Water District
5,940 served · surface water · PWSID KY1170995 - Health-based Total Haloacetic Acids (HAA5): a health-based violation (a contaminant recorded above the limit the EPA tracks), recorded once in April 2016. The EPA record lists a level of 0.061 MG/L; the limit (MCL) is 0.06 MG/L. All have since returned to compliance, per EPA records.
- Monitoring Revised Total Coliform Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded once in December 2018. All have since returned to compliance, per EPA records.
- Monitoring Consumer Confidence Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 3 times between July 2005 and July 2011. All have since returned to compliance, per EPA records.
- Monitoring Lead and Copper Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 2 times between July 1993 and July 1996. All have since returned to compliance, per EPA records.
Dixon Water Department
1,253 served · surface water · PWSID KY1170104 - Health-based Total Haloacetic Acids (HAA5): a health-based violation (a contaminant recorded above the limit the EPA tracks), recorded 7 times between October 2015 and July 2018. The EPA record lists a level of 0.062 MG/L; the limit (MCL) is 0.06 MG/L. All have since returned to compliance, per EPA records.
- Monitoring Consumer Confidence Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 5 times between January 2000 and July 2011. All have since returned to compliance, per EPA records.
- Monitoring Public Notice: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded once in July 2009. All have since returned to compliance, per EPA records.
- Monitoring Lead and Copper Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 2 times between January 2005 and October 2006. All have since returned to compliance, per EPA records.
What this means
A health-based violation means a contaminant was recorded above the limit the EPA tracks for it. A monitoring or reporting violation means a required test or report was late or missed — not that a contaminant was measured above a limit. “Returned to compliance” means the EPA recorded the issue as resolved.
This page summarizes the EPA's own records and does not assess whether your water is safe to drink. For the most current details, you can verify every record directly with the EPA, and contact your water system with questions.
Source: U.S. EPA Envirofacts SDWIS, retrieved June 2026. Records cover the EPA's full reporting history for these systems. Verify at EPA ECHO.