TapWaterMap

AK / Wrangell

AK · Tap water records

Wrangell tap water, in plain English

Here is what the EPA's own data shows about tap water in Wrangell. According to EPA SDWIS data retrieved November 2026, Wrangell is served by 1 active community water system, reported to serve about 2,300 people.

As of November 2026, EPA records show 36 violations at the community water system serving Wrangell, going back to the earliest EPA record. 16 of these are classified by the EPA as health-based (a contaminant recorded above the limit the EPA tracks); the rest are monitoring or reporting violations. Each is listed below, with its status.

Compare with another city →

What the EPA has on record, by system

Wrangell

2,300 served · surface water · PWSID AK2120143

EPA records show all 36 violations as returned to compliance.

Who supplies Wrangell's water

According to EPA SDWIS data as of November 2026, Wrangell is the only active community water system listed for Wrangell. It reports serving about 2,300 people, draws primarily on surface water, and falls in the EPA's "small (501–3,300 people)" size category.

Wrangell's EPA record at a glance

The EPA has 36 violations on record for Wrangell as of November 2026. 11 of them began between 2017 and 2026; the most recent began in October 2024. EPA records show all of them as returned to compliance.

By EPA rule

Rule Violations Health-based
Stage 2 Disinfectants and Disinfection Byproducts Rule 16 9
Surface Water Treatment Rule 5 5
Consumer Confidence Rule 5 0
Total Coliform Rule 3 0
Stage 1 Disinfectants and Disinfection Byproducts Rule 2 1
Lead and Copper Rule Revisions 2 1
Lead and Copper Rule 2 0
Long Term 2 Enhanced Surface Water Treatment Rule 1 0

By year the violation began

Year Violations Health-based
2026 0 0
2025 0 0
2024 2 1
2023 0 0
2022 1 0
2021 3 2
2020 3 2
2019 1 0
2018 0 0
2017 1 1
Before 2017 25 10

Measured levels in the EPA record

10 health-based violations in the EPA record for Wrangell as of November 2026 include a measured level and the limit (MCL) listed in the record, for 2 contaminants. The table lists the highest and the most recent level for each, as the EPA recorded them. These are levels from past compliance periods, not a measurement of the water today.

Contaminant Violations with a level Highest level (period) Most recent (period) Limit in the record (MCL)
Total Haloacetic Acids (HAA5) 9 0.081 MG/L (July 2020) 0.077 MG/L (April 2021) 0.06 MG/L
TTHM 1 0.083 MG/L (July 2005) 0.083 MG/L (July 2005) 0.08 MG/L

What this means

A health-based violation means a contaminant was recorded above the limit the EPA tracks for it. A monitoring or reporting violation means a required test or report was late or missed — not that a contaminant was measured above a limit. “Returned to compliance” means the EPA recorded the issue as resolved.

This page summarizes the EPA's own records and does not assess whether your water is safe to drink. For the most current details, you can verify every record directly with the EPA, and contact your water system with questions.

Source: U.S. EPA Envirofacts SDWIS, retrieved November 2026. Records cover the EPA's full reporting history for these systems. Verify at EPA ECHO.